Luna Light Acrygel №69, 13 ml

LIQUID GEL LIGHT ACRYGEL — innovative material for strengthening, straightening and extension of nails.
This is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of the polygel) and a small amount of hydroxyethyl methacrylate NEMA (approximately 20–30%), the main component of base coatings. Such a gel can completely replace the base.

Features:

• The wavelength for polymerization is 365–405 nm.
• The power of the UV/LED lamp is 36–48 W.
• The permissible coating thickness is 0.5 mm at the edge of the nail, 1 mm at the apex.
• Acid-free, has an average consistency.
• Has medium pigmentation, covers the free edge.
• Complete polymerization is carried out in 120 seconds.
• Suitable only for nail strengthening and extensions.
• It has good cushioning.
• During strengthening with this gel, you need to file the natural nail.
• Needs lining with Rubber Base.
• It can be further heated to make the gel thinner.

Application method:

STRENGTHENING

1. Withdrawal
2. We do not file the shape of the nail or leave 2 mm long, which we will take after alignment.
3. We file with a 220-grit file without strong pressure on the nail from above, lifting the scales of the nail plate, or we use a buff of 100 grit.
4. We do a manicure.
5. If we work with removers, wash our hands with soap after working with them.
6. We degrease the nail with the help of Nail Prep LUNAmoon. We make two approaches. We use 4 napkins for this (1 napkin for 5 fingers). The first approach: wipe the surface of the nail. The second approach: we take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.
7. We use a primer if desired, but if the base for the substrate has sufficient acidity, then it is not needed.
8. Lining with Rubber Base LUNAmoon best applied with a flat gel brush. Movements should be rubbing. We draw all the sinuses of the nail and dry it in a lamp for 60 seconds.
9. We erase the stickiness.
10. Align. If we align with gel, we make an indentation from the cuticle of 0.5–1 mm. Dry in a lamp for 60 seconds.
11. We file the form after leveling it. This is necessary so that a thickness is formed on the edge of the nail that will hold the free edge.
12. If the nail was thin, it can twist, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After sawing, wipe off the stickiness and cover with gel polish.
14. We cover with a top. Dry for 120 seconds. After drying, do not wipe with anything, because the shine may be lost.

CLASSIC EXTENSION

1. Withdrawal
2. We shorten the length of the nail to 1 mm and make a round shape.
3. We file with a 220-grit file without strong pressure on the nail from above, lifting the scales of the nail plate, or we use a buff of 100 grit.
4. We do a manicure.
5. If we work with removers, wash our hands with soap after working with them.
6. We degrease the nail with the help of Nail Prep LUNAmoon. We make two approaches. We use 4 napkins for this (1 napkin for 5 fingers). The first approach: wipe the surface of the nail. The second approach: we take an orange stick, put a napkin on it and wipe everything in the cuticle area and in the sinuses.
7. We use primer LUNAmoon.
8. Lining with Rubber Base LUNAmoon best applied with a flat gel brush. Movements should be rubbing. We draw all the sinuses of the nail and dry it in a lamp for 60 seconds.
9. We erase the stickiness.
10. We set the form for building up the free edge of the nail.
11. We lay out the shape of an artificial nail with a transparent gel. Dry for 30 seconds.
12. We file the free edge and give the nail the desired shape.
13. We wipe off stickiness and excess dust.
14. Let's walk again Rubber Base LUNAmoon on areas where the saw was used. Dry for 30 seconds.
15. Smooth with gel, put in the lamp and clamp for 10-15 seconds. If the gel has strong stickiness or contains sparkles, clamp on the 20th second.
16. Dry in a lamp for 120 seconds.
17. We wipe off the stickiness before covering with gel polish.
18. We cover with a top. Dry for 120 seconds. After drying, do not wipe with anything, because the shine may be lost.